更新日： 集計期間:Feb 18, 2026～Mar 17, 2026
※当サイトの各ページの閲覧回数を元に算出したランキングです。
更新日： 集計期間:Feb 18, 2026～Mar 17, 2026
※当サイトの各ページの閲覧回数を元に算出したランキングです。
更新日： 集計期間:Feb 18, 2026～Mar 17, 2026
※当サイトの各ページの閲覧回数を元に算出したランキングです。
1～30 件を表示 ／ 全 120 件
FlexRIO Camera Link Adapter Module
It is possible to output still images recorded on the HDD in the Camera Link standard. By adopting Flex-RIO, it can support Base, Medium, and Full configurations (up to 85MHz).
Digital/Analog Input/Output Module
It is an I/O module that acquires and outputs digital/analog signals from various sensors/switches. It can be mounted on a panel and DIN rail.
It is possible to build a system using measurement data via Bluetooth communication.
【Features】 ○ Outputs weighing data from our explosion-proof scales via Bluetooth communication to external devices (Compatible scales: FZ-B series, all GZ series, all AZ series, all CZ series) ○ Operates on dry batteries (AA manganese) with no wiring required ○ One computer can communicate with up to 6 BTZ units ○ Uses a stainless steel case that is resistant to rust and corrosion
Digital signal monitoring and control can be performed via LAN from a PC.
● You can easily control input and output by sending control commands from a PC. ● An ID number can be set for each unit. ● Equipped with an LED to check the input and output status. ● Built-in XPort in the LAN interface section. ● Convenient email alert function to notify input and output status via email. ● Control software and sample programs included as standard. ● Features a detachable terminal block for convenient maintenance. ● Compact and low-cost while supporting factory automation (FA). ● Compliant with RoHS.
Digital signal monitoring and control can be performed via LAN from a PC.
● You can easily control input and output by sending control commands from a PC. ● An ID number can be set for each unit. ● Equipped with LEDs to check the input and output status. ● Built-in XPort in the LAN interface section. ● Convenient email alert function to notify input and output status via email. ● Control software and sample programs are included as standard. ● Features a detachable terminal block for convenient maintenance. ● Compact and low-cost while supporting FA (Factory Automation). ● Compliant with RoHS.
Digital signal monitoring and control can be performed via LAN from a PC.
● You can easily control input and output by sending control commands from a PC. ● An ID number can be set for each unit. ● Equipped with LEDs to check the input and output status. ● Built-in XPort in the LAN interface section. ● Convenient email alert function to notify the input and output status via email. ● Control software and sample programs are included as standard. ● Features a detachable terminal block for convenient maintenance. ● Compact and low-cost while being compatible with FA (Factory Automation). ● Compliant with RoHS.
"Suitable for embedded applications" High-precision temperature and humidity sensor converts digital signals to analog signals. It can be easily connected to existing measuring instruments!
The temperature and humidity analog conversion output module is suitable for integration into control devices and equipment, as it performs DA conversion and outputs data. It enables simultaneous collection and control of other data. The analog board size is 10x20mm, making it compact enough to be considered part of a cable, while providing simultaneous output for two channels of temperature and humidity. We have also developed a version compatible with the new SHT45 sensor, and the model numbers have been revised for clarity. ◆ SCM-DA1 - Compatible sensors: Various SHT35, HYT939 - Power supply: DC 5V - Output voltage range: 0 to 4096 mV ◆ SCM-DA2 - Compatible sensors: Various SHT45, HYT939 - Power supply: DC 5V to 24V - Output voltage range: 0 to 3.0V The SHT45 is a new temperature and humidity sensor cable exclusive to Syscom, so please make use of it for advanced development. ◎ For more details or inquiries, please contact us through our website. https://syscom-corp.jp/
Simultaneous control of multiple systems within the same area is possible! Equipped with a relay for output, no application for a radio station license is required.
The "KSR2.4RY" is an output unit that can output 1 to 4 contact points without the need for a radio station license with a technical conformity mark in the 2.4GHz band. Designed for "light industry" applications, it can easily achieve wireless communication even in harsh usage environments such as civil engineering, construction, vehicles, welfare, and agriculture. Thanks to its unique frequency hopping protocol, multiple systems can be controlled simultaneously within the same area without being aware of the wireless frequency channels. Additionally, it is equipped with a LINK output indicator, allowing for constant monitoring of the communication status between the operation device and the control device. It supports output of contact information for up to 4 systems and is equipped with a relay, enabling direct control of solenoids and other devices (inductive load up to 2A). 【Features】 ■ Compliant with ARIB STD-T66 second-generation low-power data communication system ■ Equipped with a relay for inductive loads up to 2A ■ Communication distance is approximately 100m in line of sight ■ Communication status can be confirmed via LINK indicator ■ Achieves a Hamming distance of 6 to ensure safety It can be used in combination with KST2.4W-2, KST2.4W-3, KST2.4W-4, and KST2.4S. *For more details, please refer to the related links or feel free to contact us.
Capable of ON/OFF operation from multiple devices for light industry, with a range of 300 to 400 meters. A successor to the KSR426W, now supporting 24V.
The "KSR426W-A" is a waterproof output unit equipped with four control outputs and four selectable output modes according to application. It is the successor to the KSR426W and now supports the highly requested DC 24V. Designed for "light industrial" applications, it enables easy wireless implementation even in harsh environments such as civil engineering, construction, vehicles, welfare, and agriculture. To ensure safe use in challenging environments like outdoor work, its robustness and waterproofing have been enhanced, allowing for reliable long-distance communication developed through our wireless technology. It can be utilized as a highly reliable telecommunication system for various industrial applications, including civil engineering, construction, vehicles, welfare, and agriculture. 【Features】 ■ PhotoMOS relay (4 outputs) Each output: up to 48V, 100 mA (DC) ■ Communication distance is approximately 300 to 400m in line of sight ■ Up to 100 transmitters can be registered ■ Achieves a Hamming distance of 6 to ensure safety *For more details, please refer to the related links or feel free to contact us.
Four analog outputs and one digital input/output can be combined freely and efficiently according to the situation!
The SS wireless analog signal output unit UMAO-411 has 4 analog output points and 1 digital input and output point each. It efficiently accommodates various signal transmission forms with flexible combinations. It collects signals and transmits them wirelessly. Low cost, low power consumption, and high flexibility. For more details, please download the catalog or contact us.
16CH discrete output / 16CH discrete input
◾Supports 16 DI channels and 16 DO channels ◾Transmission speed: 3/6/12 Mbps ◾Equipped with RJ-45 phone jack for easy installation ◾Compact single-board design that meets space constraints and cost-effective requirements ◾Fuse design to protect against overcurrent in digital output channels
8/16CH 16Bit D/A conversion
Features - PICMG 2.0 Revision 2.1 - 16-bit D/A resolution - 16-channel voltage (6216V) - 8-channel voltage output (6208A and 6208V) - 8-channel current output (6208A) - Bipolar analog output range - 4-channel TTL DI and 4-channel TTL DO - Rear I/O available
64-bit TTL Digital I/O with Built-in-Test
The VME-2510B is a VMEbus compatible 64-Bit TTL Input/Output Board. The VME-2510B is designed with common programming features and Subsystems configured with contiguous I/O addresses to conserve memory as the VME-2120. These products are designed with two sets of board address switches to provide an efficient memory address map for CSR and I/O addresses.
HDMI 1.4a output unit dedicated to TG45AX that supports 3D (stereoscopic images).
TG45CX003 is an HDMI Ver.1.4a compliant output unit (optional) exclusively for the TG45AX test signal generator. It is used by inserting it into the rear slot of the TG45AX test signal generator.
TG45AX dedicated HD-SDI/SD-SDI output unit
TG45AX001 is a serial digital output option exclusively for the TG45AX test signal generator. It can output HD-SDI or SD-SDI (D1) by switching. HD-SDI is a single-link 4:2:2 10-bit format. In addition to the more than 50 test signals built into the TG45AX itself, it can also output optional natural images and resolution charts with variable levels. Furthermore, both HD-SDI (excluding 720 24p and 720 23.98p) and SD-SDI can output 8-channel embedded audio, with settings for sine wave frequency per channel, variable levels, and MUTE ON/OFF capabilities.
HDMI output unit for TG45AX (compliant with Version 1.3)
TG45BX003 is a dedicated HDMI Version 1.3 compliant dual output option unit for the TG45AX test signal generator. The video system supports Primary and Optional (up to 165MHz) and outputs over 50 types of test signals built into the TG45AX main unit. The audio system supports Basic Audio with a sampling frequency covering up to 192kHz. External audio input is also possible. For outputting natural images and resolution charts via HDMI, a separate purchase is required. Some natural images and resolution charts support 12-bit gradation.
48-bit digital I/O unit with USB interface!
Secures 48-bit input and output, allowing I/O switching on a byte-by-byte basis. It enables the construction of a compact, lightweight, low-cost, simple, and high-performance system. By using an optional adapter board, it is possible to achieve up to 48 relay outputs or power transistor outputs.
Plug it into the USB of the computer for ON/OFF control of the unpowered contacts. It can handle large loads too!
The "TUSB-S01SW Series" non-voltage contact output unit can be used immediately by simply connecting it to a computer's USB and utilizing the included software. It supports large loads of AC250V/5A, making it widely applicable in production equipment and research and development, while also improving efficiency by eliminating the need for prior programming preparations. Equipped with two contact outputs for ease of use, it allows for the selection of three types of contact configurations as needed: "a contacts x2," "b contacts x2," or "one a contact and one b contact." 【Features】 ■ Adopts mechanical relays for clear ON/OFF operation ■ Achieves high performance at a low price ■ Complies with RoHS directives (uses lead-free solder without cleaning) ■ All units are tested before shipment ■ Built-in bidirectional clamping varistor to prevent overvoltage to the contacts *For more details, please refer to the documentation. Feel free to contact us with any inquiries.
Detect the presence or absence of voltage at the input terminal, or the ON/OFF state of a voltage-free contact!
This is a fully isolated digital I/O unit with a USB interface. It is an interface that detects the presence or absence of voltage (AC/DC) applied to the input terminals, or the ON/OFF state of non-voltage contacts such as switches and relays. It has two input points, making it very convenient. The computer side and the input circuit are completely isolated, allowing for safe connections to any circuit. It comes with sample programs for immediate operation and complies with RoHS directives. Up to 16 units can be connected simultaneously. Each unit is tested before shipment, ensuring reliable use. We offer the following two models: - TUSB-S02IN1Z: Voltage input type - TUSB-S02IN2Z: Non-voltage contact input type
With remote commands from a computer, it is easy to output a voltage-free contact to distant devices!
Connect to the LAN and output a voltage-free contact to remote devices via commands from a computer. It demonstrates its power in system control for production factories, power facilities, and large buildings where a LAN is established. It complies with the RoHS directive. All units are tested before shipment, ensuring you can use them with confidence.
15ch Insulated Digital Output Module ND-6056
ADLINK's NuDAM data acquisition module constitutes a comprehensive acquisition network and control system. Up to 256 NuDAM modules can communicate over a single serial RS-232 connection to an RS-485 network from a host computer, enabling communication over distances of up to 4000 feet. Based on an RS-485 multi-drop network system, each module has a unique address ID that allows control of all NuDAM modules within the RS-485 network through a simple ASCII command and response protocol via a standard RS-485 interface. The NuDAM modules provide direct communication with various sensors that perform all signal conditioning, scaling, linearization, and conversion, allowing for the acquisition of measurements for temperature, pressure, flow, voltage, current, and multiple types of digital signals.
Digital I/O Control Board USB2.0-I02
This is an introduction to a digital control board developed for the purpose of "easily controlling digital I/O from a PC." ■□■Features■□■ ■Standard equipped with USB firmware, USB device driver, dedicated API, and reference application (open source) ■Easily control I/O from the standard Windows-compatible control software included ■Significantly simplifies the description of control software through a dedicated API ■Can be used for outputting specific patterns to the target board and collecting data from the target board ■Allows control of up to 16 boards from a single host PC For other functions and details, please download the catalog or contact us.
Easily change the signal type as needed! A compact input/output unit that doesn't require a converter.
In the part that governs the signal input and output functions with the process, it is possible to expand and modify according to the diverse types of signals from field instruments. Additionally, the common power card and communication card can be duplicated, allowing for a stable system construction. 【Features】 ○ Built-in small unit with a converter ○ Up to 8 (8 types) I/O cards can be mounted on 1 base! ○ Supports redundancy for power and I/O communication ○ Compatible with isolated input and output *For more details, please download the catalog or contact us.
Supports digital input/output, analog input/output, and IO-Link units!
The "EX600 Series" is a fieldbus device equipped with functions for detecting disconnections/short circuits in input/output devices and ON/OFF counter functions for input/output signals. It supports connectors mounted on input/output devices, including M12 connectors, M8 connectors, D-sub connectors, and spring-type terminal blocks. Status confirmation and forced output are possible via a web browser. Each unit can be connected in any order, up to a maximum of 9 units. 【Features】 ■ Self-diagnosis function ■ Supports various connectors ■ Web server function ■ Connectable up to 9 units *For more details, please download the PDF or feel free to contact us.
Consolidate safety/general-purpose input/output into a single manifold! Up to 9 modules can be connected (in any order).
We would like to introduce the safety communication-compatible fieldbus equipment we handle, the 'EX600 Series.' Safety input/output modules and general-purpose input/output modules are consolidated into one manifold. It complies with IEC 61508/IEC 62061 SIL3 and ISO 13849 PL e. 【Features】 ■ Safety output ■ Safety input ■ Simplified layout & reduced wiring *For more details, please download the PDF or feel free to contact us.
Rich lineup of input/output points (16 to 192 points), insulated/non-insulated options. Compatible with USB 2.0 (480 Mbps/12 Mbps).
Compatible with Windows 11 / 10 / Linux Rich lineup of input/output points, isolated/non-isolated options ● Isolated Input Type Photocoupler isolated input → High noise resistance. → Protects the computer from external circuit anomalies. Built-in isolated power supply → No need to supply external power. Input voltage supports DC5V to 48V → Usable in electrical circuits with multiple voltages such as DC12V and DC24V. ● Isolated Output Type Photocoupler isolated output → Protects the computer from external circuit anomalies. Built-in isolated power supply → No need to supply external power. (However, power for the load circuit is required) High current open collector output (up to 90mA per point) ● Non-Isolated Input Type TTL input → Can be directly connected to TTL ICs and CMOS ICs. → Built-in pull-up resistors allow direct connection to switches and open collector outputs. ● Non-Isolated Output Type High current open collector output (up to 90mA per point)
Relay output points (8 to 72 points)・c contact mechanical relay output (AC125V 0.3A, DC30V 1A)
Compatible with Windows 11 / 10 / Linux Supports USB2.0 (480Mbps / 12Mbps) Depending on your needs, you can choose from a wide range of options for relay output points, digital input/output points, and more. High current c contact mechanical relay output → Can switch AC125V 0.3A and DC30V 1A. → Since it has c contacts, it can also be used as a normally open contact (a contact) or a normally closed contact (b contact).
This is a digital input/output board with I2C connection. It can also be used as an expansion board for Raspberry Pi.
This is a digital input/output board with I2C connection. It features 8 isolated digital inputs and 4 isolated digital outputs. It can also be used as an expansion board for Raspberry Pi and Jetson. ● The digital input/output is isolated from the internal circuit, protecting it even if there is an anomaly in the external circuit. ● The digital inputs are photo-coupler inputs. ● It supports DC5V to DC24V, which is commonly used in control systems. ● It has high noise resistance and high reliability. ● The digital outputs are photo-relay outputs. ● It can control high voltage and high current on/off. - Operating voltage: up to 48V - Output current: up to 400mA (Ta=25℃), up to 250mA (Ta=60℃) ● Compared to mechanical relays, it has a long lifespan, silent operation, and fast response. ● It can be stacked and used with "Raspberry Pi 5/4/3/2/Zero," "Jetson Nano Developer Kit," and "our company's I2C expansion board." The expansion connector is already implemented, so it can be used simply by stacking. Due to the I2C connection, it can also connect and be used with various other boards. ● It complies with the RoHS directive.
Supports USB 2.0! The time spent occupying the USB bus is minimized.
The "DAQ-X Series" is a USB-connected, isolated, high-performance digital input/output unit (USB I/O) with high-speed sampling capabilities. It allows you to read the status of switches and drive relays or LEDs using the USB port of a computer. Additionally, it has sampling functionality, enabling digital input and output at regular intervals. 【Features】 ■ High-speed sampling (up to 10 MSPS) ■ Equipped with a data buffer (8,000 samples) ■ External clock and external trigger functions ■ Photocoupler isolated input ■ Supports a wide range of input voltages *For more details, please refer to the related links or feel free to contact us.
